Parker Pumps and Motors HENGTE Company

The Parker F12 motor can provide a speed of up to 27000 rpm and a torque output of 6800 Nm, suitable for heavy-duty machinery such as excavators, forklifts, and cranes.  The motor adopts gear type transmission, which has high reliability and durability.

PARKER pressure motor, also known as oil motor, has the advantages of small size, light weight, simple structure, good processability, insensitivity to oil pollution, impact resistance, and small inertia.  Characteristics of PARKER hydraulic motor: From the perspective of energy conversion, hydraulic pumps and hydraulic motors are reversible hydraulic components that can be transformed into hydraulic motor working conditions by inputting working fluid to any type of hydraulic pump;  On the contrary, when the main shaft of the hydraulic motor is driven to rotate by external torque, it can also become the working condition of the hydraulic pump.  Because they have the same basic structural elements - a sealed and periodically variable volume and corresponding oil distribution mechanism.

There are two types of axial variable piston pumps and radial variable piston pumps

The working principle of the axial variable piston pump is as follows:

When the electric motor drives the transmission shaft to rotate, the pump cylinder and plunger rotate together, the plug head remains connected to the swashplate, and the swashplate is at an angle to the cylinder body, but the swashplate does not rotate.  When the cylinder rotates, the plunger will perform reciprocating motion in the pump cylinder due to the inclined surface of the swash plate.  When the plunger rotates to the low point of the swash plate, the volume of the plunger cylinder gradually increases, so the liquid is sucked into the oil cylinder through the suction port of the oil distribution plate.  However, when the plunger cylinder rotates to the high point of the swash plate, the volume of the plunger cylinder gradually decreases, and the liquid in the oil cylinder is discharged through the outlet of the oil distribution plate.  As long as the transmission shaft continues to rotate, the liquid will be continuously sucked in and discharged.

Original packing, neutral packing or customized packing

100% product quality protection

100% on-time shipment protection

Quick response within 24 hours .

F11-005-MB-CV-K-000-0000-0T Hydraulic Motor

F11-006-MB-CV-K-000-000-0 Hydraulic Motor

F11-006-MB-CV-K-000-000-0 Hydraulic Motor

F11-005-MB-CV-K-000-0000-0T Hydraulic Motor

F12-030-MF-IV-D-000-000-0 Hydraulic Motor

F12-030-MS-SV-S-000-000-0 Hydraulic Motor

F12-040-MS-SV-S-000-000-0 Hydraulic Motor

F12-040-MF-IV-K-000-000-0 Hydraulic Motor

F12-040-MS-SV-T-000-000-0 Hydraulic Motor

F12-040-MF-IV-D-000-000-0 Hydraulic Motor

F12-060-MF-IV-D-000-000-0 Hydraulic Motor

F12-060-MS-SV-S-000-000-0 Hydraulic Motor

F12-060-MF-IV-K-000-000-0 Hydraulic Motor

F12-060-MS-SV-T-000-000-0 Hydraulic Motor

F12-080-MF-IV-D-000-000-0 Hydraulic Motor

F12-080-MS-SV-T-000-000-0 Hydraulic Motor